Project Description
Roller Brake Tester
VBT-3T/10T/15T
Roller brake tester VBT it is a modern equipment for inspection of braking systems in vehicles with total weight up to and above 15t, including cars, commercial vehicles, trucks, buses, tractors, trailers as well as 4×4 drive vehicle. Roller brake tester can work as a part of the integrated VISKOR ABS lane – VST(speedometer tester) and VSS(side slip tester) or as a stand-alone device. Either measuring system VIS-Pro(PC type console) or VIS-Check should be selected.
- Especially suitable for acceptance and diagnostic lanes
- Roller beds galvanized and painted
- Strong and reliable in ground type
Technical Specifications
Model | VBT-3T | VBT-10T | VBT-15T | |
---|---|---|---|---|
Max axle load | 3 ton | 10 ton | 15 ton | |
Braking force | 1,500 kgf | 6,000 kgf | 10,000 kgf | |
Roller | Diameter | 104 mm | 124 mm | 210 mm |
Length | 850 mm | 1,200 mm | 1,200 mm | |
Revolution RPM | 9 rpm | 9 rpm | 9 rpm | |
Wheel track | 1,420 mm | 1,850 mm | 1,850 mm | |
Cylinder | Diameter | 150 mm | 255 mm | 300 mm |
Stroke | 110 | 110 | 110 | |
Air pressure | 10 kgf/cm2 | 10 kgf/cm2 | 10 kgf/cm2 | |
Sensor | Load cell | Load cell | Load cell | |
Drive motor | 2 x 0.75 kw | 2 x 2.2 kw | 2 x 2.4 kw | |
Motor power | 220/380V, 50/60Hz, 3P | 220/380V, 50/60Hz, 3P | 220/380V, 50/60Hz, 3P | |
Display power | 220V, 50-60Hz | 220V, 50-60Hz | 220V, 50-60Hz | |
Dimensions | 3,400x755x500 mm | 4,000x800x650 mm | 4,000x810x650 mm |